Toughener series-PC class

PC toughener (GT-RPC18)

Product Description

This product is used for PC toughening, strengthening, etc. The product can be highly compatible with PC resin, improve the impact strength of PC resin, and reduce the internal stress of PC material. This product can also be applied to alloys such as PC/ABS. The product improves the compatibility of the alloys, making alloy materials not be delaminated or peeled.

Typical Use
  • PC toughening
  • PC reinforcing and toughening 
  • flame retardant PC toughening   

  • PC/ABS alloy coupling and toughening

Product Features
  • Improve the impact strength of PC resin
  • Reduce internal stress of PC material
  • Improve the compatibility of PC/ABS alloy, make the alloy material not be delaminated or peeled
 
Instructions
  • Blend with PC or PC/ABS resin for granulation, the recommended add amount is 2~3%。
Packaging and Storage
  • Use kraft paper bag lined with plastic bag for packaging. The net weight of each bag is 25Kg. It can be stored and transported under dry conditions as non-dangerous goods. Avoid sunlight and water

Properties

Trademark

Melt Index(g/10min)

Appearance

MAH content

Density(g/cm3)

GT-RPC18

2~5

 light yellow particles

High

0.96-1.02

Effects of GT-RPC18 on the properties of PC and reinforced PC

Properties

Measurement

PC

PC/RPC18(97/3)

PC/GF/RPC18(77/20/3)

Tensile Strength

MPa

65

 58 102

Bending strength

MPa

85

80

125

Izod impact strength

KJ/m²

 50 62

19

Note: The above data are typical laboratory results, true and reliable, for reference only, and do not make a formal quality commitment.