Compatibilizer series-PC/ABS class

PC/ABS alloy compatibilizer (GT-GS)

 
Product Description

This product is a special compatibilizer developed for PC/ABS and PA6/ABS by Xingete Company. This product is an unconventional copolymer of maleic anhydride and styrene, which improves the impact resistance, low-temperature resistance, and compatibility of engineering plastic alloys.

 
Typical Use
  • PC/ABS alloy compatibilizer
  • PA6/ABS alloy compatibilizer
  • Reinforced PC toughener, compatibilizer
 
Product Features
  • Improve alloy compatibility
  • Improve the overall performance of the alloy    
  • Improved alloy processing performance
Instructions
  • Blend with PC, ABS, and other resins for granulation, the recommended add amount is 2~5%。
Packaging and Storage
  • Use kraft paper bag lined with plastic bag for packaging. The net weight of each bag is 25Kg. It can be stored and transported under dry conditions as non-dangerous goods. Avoid sunlight and water

Properties

Trademark

Melt Index(g/10min) Appearance MAH content Density(g/cm3)
GT-GS 2~5 Light yellow particles High

0.96-1.02

 

Performance comparison between GT-GS and EM-500 (Korea)/M521 (Japan)

Properties

Measurement

PC/ABS/GS(70/30/5)

PC/ABS/EM500(70/30/5)

PC/ABS/M521(70/30/5)

Tensile Strength

MPa

56

55

54

Bending strength

MPa

69

66

65

Izod impact strength

KJ/m²

55

57

56

Note: In the above table, EM-500 is the powdery MBS graft copolymer of Korea LG company, and M-521 is the powdery MBS impact modifier of Japan Kane Ace company.

The above data are typical laboratory results, true and reliable, for reference only, and do not make a formal quality commitment.